What Time is it? Your iPad 2 *Still* Doesn’t Know

Back in February, 2011, I found that a Wi-Fi only iPad 1 was not invoking an NTP daemon to check with an external time standard over that Wi-Fi connection. Apple seems to have determined that this is not necessary, even though, without constant calibration, the iPad 1 clock can drift by a second per day, sometimes much more. In addition, it was found that with iOS 4.2.1, clock syncing does not occur when connected to a Mac via iTunes.

The upshot is that doctors, astronomers, private pilots, researchers and others who depend on the clock in the Wi-Fi only iPad could find themselves many minutes off from the actual time, and that’s unacceptable for many purposes.

iPad 2 Update

My testing of a Wi-Fi only iPad 2 has shown that the situation is no better. With iOS 4.3.2, I found that syncing of the time still does not occur when connected to a Mac via iTunes and a full sync + backup is applied.

In addition, the oscillator that Apple has chosen for the iPad 2 doesn’t seem to be any better than that in the iPad 1. Over the past few weeks, I have been keeping a log of the time offset between an NTP time standard and the iPad 2’s internal clock. I did this by running an app from Emerald Sequoia called Emerald Time. It shows the offset, and then I would snap an iPad 2 screen shot to provide a photographic log — like this:

Emerald Time

The iPad 2 offset (fast in this case) is shown in red: -20.549 sec.

I read the data off the screen shots and entered it into Apple’s Numbers spreadsheet, then created a chart. The data points have a linear, least squares fit applied. Here’s the chart of the drift.

iPad 2 clock drift

Negative values in the chart indicate that the iPad’s internal clock is behind, positive numbers indicate that the iPad’s clock is running ahead of official time. This trend, from behind to ahead, is repeated on the iPad 2 from the iPad 1, that is, both clocks on my iPads run slightly fast. In the data above, the iPad 2 clock is gaining about 1.67 seconds/day which is almost a minute a month. (I switched the sign of the offsets to make the chart easier to read.)

Conclusion

Apple uses an oscillator in my iPad 2 that drifts just as much as the one in my iPad 1. The measured drift, in the iPad 2, is about 1.67 seconds/day. Nothing has changed in the iOS so that this Wi-Fi only iPad is time synced to a Mac when connected and synced. That would help a lot because Macs are typically connected to a time standard (by default time.apple.com) via NTP.

For users who must have good accuracy with their Wi-Fi only iPad 1 or 2, I strongly recommend Emerald Time, linked to above, and weekly resets of the iPad’s internal clock.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.