Cell phones aren’t perfect. No matter how smart their features, their ability to make and receive reliable calls often suffers. Sometimes it seems that just moving your head or a change in wind direction is all it takes for a call to drop. The Z-Boost METRO YX-540 offers a solution for apartment or condo dwellers who often do not have easy access to a roof or other elevated area to mount a high-gain antenna.
The Z-Boost METRO uses a window-mounted antenna, designed to snare weaker cell signals in marginal areas, and pump them up and then rebroadcast them within your living space – hopefully improving your call quality and reliability.
The Z-Boost MEtRO is compatible with all U.S. carriers and mobile devices using 800 & 1900 MHz except Nextel/iDEN or 4G, 2100MHz phones. It is optimized for iPhones and was tested using iPhone 4, iPhone 3GS, and 3G using AT&T.
Installing the product
The installation of the Z-Boost METRO is the key ingredient to successfully using this product.
The box arrives with everything you need to build your own mini cell-site. There is a utilitarian white plastic antenna, a sturdy plastic repeater unit with a single antenna, a power supply, and a generous coil of coax cable with screw on-connectors to link everything together. Also included are ample, yet simple instructions – and suction cups to aid window installation.
There are two primary components. A receiving antenna and a repeater unit.
The first step is to find the best window for the receiving antenna, and there is where I was stopped cold. The receiving antenna must be placed on a window that is two feet away from any metal. All the windows in my condo have burglar bars.
So I enlisted the help of a good friend who has such poor reception at home for his iPhone that the only place he could make calls was from one plastic chair in his back yard. He jumped at the chance to help evaluate the Z-Boost METRO. The installation and testing all took place at his house.
The first step was to find the best window for the receiving antenna. You may be lucky enough to have an exterior window that actually faces one of your carrier’s cell towers. In our case, it was close, but no cigar. Although a tower was relatively close, there’s a ridge between it and his house, blocking the direct signal. Our best choice was a more distant tower that has line of sight.
Many carriers will help you locate cell towers nearest your house or work location – and may even provide a link to a web map showing tower locations. We weren’t that lucky. Since we both have iPhones and AT&T, we were left on our own.
Anticipating such problems, Z-Boost suggests you visit your exterior windows, and hold your iPhone against each window and closely observe the bars representing signal strength. Note which windows offer the strongest signal. Obviously wooden windows are preferred — remember that metal will interfere with the signal.
Place the antenna as high as possible on the window, and affix it, at least temporarily, with the supplied suction cups. They will suffice during testing.
The receiving antenna
Next, select a location for the repeater. They recommend a location in the center of your living area, away from large metal objects, and other electronic equipment like cordless phones and stereo equipment. They also recommend you keep the transmitter unit separated from the window unit.
We found that patience in checking out several locations for both the receiving unit and the receiving antenna resulted in the best final results. As it ended up, we had to add an extension cord once we found the best placement because the power supply cord supplied is fairly short.
The repeater unit
The final step is to connect the two units by coax and plug in the power supply. There is no power switch because you never turn it off.
Observe the status/power light on the top of the unit. Red means bad, and green means good.
Once the unit powers on and negotiates with the cell tower and acquires signal, it then evaluates whether the setup is satisfactory. Green you pass, red you fail.